天天摸天天碰天天爽天天弄

滚轮罐耳

滚轮罐耳

滑动罐耳沿罐道工作时,因罐道的设定按照,会生产触点开关、微弯最最高点,轮头会接受技术水准拉力功效,会因为支伸缩臂、基座和降低器中间的铰接功效,使降低器受拉区缩生产复胖力。降低器的复胖力八是以确保升降袋子能顺利经过最最高点;二以确保升降袋子不了与罐道情况触碰;三是要以确保升降袋子在上升时和急剧下降具体步骤 中摇晃浮度不了较大。因而降低器的降低机械性能是严苛按升降袋子的克重、工作运行速度实现设定的,但其轮头主要技术水准拉力一些 要不大于或值为行业内标准
 When the drum ear is running along the tank road, the connection point and bending high points will occur due to the design and installation of the tank road, and the wheel head will be affected by horizontal thrust, and the rebound force between the arm frame, base and buffer. The rebound force of the buffer is to ensure the smooth passage of the lifting container; second, the lifting container shall not collide with the tank channel; third is to ensure the rise and descent The medium swing range shall not be too large. Therefore, the buffer performance of the buffer is designed strictly designed according to the weight and operation speed of the lifting container, but the maximum horizontal thrust of the wheel head must be less than or equal to the requirements of the industry standards. The roller tank ears designed and manufactured according to the above theory can effectively meet the user requirements. When 3. on the lifting container, the tightening degree of the polyurethane wheel and the tank channel should be reasonably determined according to the tank channel installation accuracy (vertical degree) and the buffer travel of the series of products, too large and too small will cause the large swing of the lifting container, causing the collision between the iron tank ear and the tank channel of the lifting container. If the installation accuracy of tank road meets the national standard, the lowest point of polyurethane wheel and tank road can be tightened. 


水切割机

水切割机

水切割机

水切割机

水切割机

水切割机